Infrared Thermal Imaging Inspection

Infrared Thermal Imaging Inspections in Central Florida

When it comes to protecting your home, not all problems can be seen with the naked eye. Leaks behind walls, missing insulation, or overheating electrical systems may be hidden but can cause serious damage if left unchecked. At Full Circle Home Inspectors, we use infrared thermal imaging to uncover these hidden issues and give homeowners, buyers, and sellers peace of mind.



Our advanced thermal cameras allow us to see what lies beneath the surface, helping identify costly problems before they turn into major repairs. Whether you’re purchasing a home in Lake County, selling a property in Marion County, or checking for storm damage after a hurricane, our infrared inspections give you the full picture.

What Is Infrared Thermal Imaging?

Infrared thermal imaging, also called thermal scanning or infrared inspection, uses a special camera to detect differences in heat (temperature) on surfaces. Every material emits a heat signature, and when something is out of place—such as water behind drywall, missing insulation, or an overheating circuit—it shows up as a hot or cold spot on the camera.



Unlike a traditional inspection that relies only on visual checks, thermal imaging allows us to see hidden issues without drilling holes or tearing into walls. It’s a non-invasive, reliable way to find problems early.

Why Thermal Imaging Matters in Florida Homes

Florida homes face unique challenges because of our climate and environment:



  • High humidity increases the risk of hidden moisture and mold.

  • Hurricanes and tropical storms often cause roof leaks and water intrusion.

  • Hot summers put extra strain on insulation and air conditioning systems.

  • Older electrical systems can overheat and create fire hazards.

Thermal imaging helps homeowners in Central Florida identify these problems before they worsen. For buyers, it can prevent costly surprises. For sellers, it builds trust with potential buyers. For homeowners, it’s about peace of mind.

What We Detect With Infrared Thermal Imaging

Our infrared thermal inspections can uncover a wide range of hidden issues, including:

1. Moisture Intrusion

Leaks from the roof, plumbing, or windows often remain hidden inside walls or ceilings. Left untreated, they can lead to structural damage and mold growth. Thermal imaging can quickly identify cold spots caused by moisture.

2. Insulation Problems

Poor or missing insulation means higher energy bills and less comfort. Our scans show areas where insulation is missing, damaged, or poorly installed—common in both older homes and new construction.

3. Electrical Hotspots

Overloaded circuits, loose connections, and failing breakers give off excess heat. With thermal imaging, we detect overheating electrical systems before they become fire hazards.

4. HVAC Issues

Air leaks in ductwork or imbalances in heating and cooling systems can be spotted through temperature variations. This helps improve energy efficiency and comfort.

5. Roofing Problems

Thermal scans can reveal hidden leaks, moisture under shingles, or areas where water has seeped in after storms. This is especially important for Florida homeowners after hurricane season.

6. Pest Activity

In some cases, pest infestations—like rodents nesting in walls—create unusual heat patterns. Thermal imaging can help pinpoint suspicious areas.

Benefits of Infrared Thermal Imaging

  • Non-Invasive – No drilling, cutting, or damage to your home.

  • Early Detection – Find small problems before they turn into big repairs.

  • Cost Savings – Prevent expensive repairs by addressing issues early.

  • Peace of Mind – Know your home is safe, sound, and energy efficient.

  • Stronger Negotiations – Buyers and sellers can use results to negotiate fairly.

Who Needs a Thermal Imaging Inspection?

Infrared thermal imaging is valuable for many types of clients:


  • Home Buyers – Identify hidden issues before closing on a property.

  • Home Sellers – Prove your home is in great condition to potential buyers.

  • Homeowners – Check for leaks, energy loss, or electrical risks.

  • Post-Storm Inspections – Ensure your home hasn’t suffered hidden hurricane damage.

  • New Construction Owners – Verify insulation, roofing, and systems are properly installed.

In Central Florida, where storms, humidity, and energy costs are constant concerns, thermal imaging provides homeowners with extra confidence.

Our Process at Full Circle Home Inspectors

When you schedule an infrared thermal imaging inspection with us, here’s what you can expect:


  1. Initial Walkthrough – We begin with a visual inspection to note any areas of concern.

  2. Thermal Scan – Using high-resolution infrared cameras, we scan walls, ceilings, floors, electrical panels, ductwork, and other key areas.

  3. Analysis – Our inspectors analyze thermal images to distinguish between normal patterns and signs of potential problems.

  4. Detailed Report – You’ll receive a clear, easy-to-read report with images, findings, and recommendations.

  5. Next Steps Guidance – If an issue is found, we guide you on whether further evaluation or repair is needed.

Why Choose Full Circle Home Inspectors?

Not all inspectors use thermal imaging, but at Full Circle, we believe it’s an essential tool for Florida homeowners. Our certified team brings:



  • Experience in Central Florida homes – We know the common issues in Lake, Marion, and Sumter counties.

  • Advanced technology – High-quality infrared cameras for accurate results.

  • Detailed reporting – Easy-to-understand reports with photos and explanations.

  • Customer-first approach – We don’t just inspect; we educate and empower homeowners.

We’re proud to serve homebuyers, retirees moving to The Villages, families buying their first home, and long-time Florida residents who want to keep their homes safe.

FAQs About Infrared Thermal Imaging

  • What does an infrared thermal inspection cost?

    Pricing depends on the size of the home and the scope of the inspection. We provide clear, upfront quotes—contact us today for details.

  • Is thermal imaging part of a standard home inspection?

    Not always. Many inspectors do not include thermal imaging unless requested. At Full Circle, we offer it as an add-on or as part of specialized inspections.

  • Can thermal imaging find mold?

    Thermal imaging doesn’t directly detect mold, but it does identify moisture intrusion—the main cause of mold growth. We often recommend combining thermal imaging with air quality testing if mold is suspected.

  • Do I need thermal imaging if the home looks fine?

    Yes. Many issues, like leaks or insulation gaps, are invisible to the eye. Thermal imaging can potentially identify these issues. 

  • How long does the inspection take?

    Most thermal imaging inspections take 1–2 hours, depending on the size and condition of the home.

  • Is infrared safe?

    Yes. Infrared thermal imaging is completely safe and non-invasive. It uses no radiation or harmful processes.

Schedule Your Infrared Thermal Imaging Inspection Today

Whether you’re buying a new home, selling a property, or protecting your investment, an infrared thermal imaging inspection gives you the peace of mind you deserve.



At Full Circle Home Inspectors, we combine local expertise with advanced technology to deliver reliable results for Central Florida homeowners.

Uncover what you can’t see—schedule your infrared thermal imaging inspection with Full Circle Home Inspectors today.